# ISO 3834 & EN 1090 Welding Traceability — Digital Compliance

Source: https://www.therness.com/blog/iso-3834-en-1090-welding-traceability-thermography/
Language: en

![ISO 3834 & EN 1090 Welding Traceability — Digital Compliance](https://www.therness.com/assets/images/blog/iso-3834-en-1090/hero-iso-3834-traceability.webp)

Turn welding thermal data into audit-ready ISO 3834 and EN 1090 records. Step-by-step guide to digital traceability, document retention, and QMS integration.

**Author:** Luca Santoro **Published:** 2 November 2025 **Reading time:** 9 min

## What Traceability Really Means in ISO 3834 and EN 1090

Traceability links each weld to its procedure (WPS), qualification records (PQR/WPQR), materials and consumables, operator identity, and acceptance result. ISO 3834 defines the quality requirements framework for fusion welding; EN 1090 mandates factory production control (FPC) for structural steel/aluminium, including welding coordination and documented inspection/test plans.

Before a traceability audit, use the [ISO 3834 & EN 1090 audit checklist for welding manufacturers](https://www.therness.com/blog/iso-3834-en-1090-audit-checklist-welding-manufacturers/) to verify your records are complete — it covers WPS validation, PQR records, welder qualifications, and consumables traceability. For consumables-specific batch tracking, see our guide on [welding consumables traceability and digital ISO 3834 compliance](https://www.therness.com/blog/welding-consumables-traceability-iso-3834-digital/).

Thermography adds objective evidence at production time: process stability metrics (e.g., cooling rate windows, HAZ width, toe cooldown), time‑stamped frames, and alarm logs mapped to joint IDs. A fixed [thermal weld camera](https://www.therness.com/products/heatcam-ir-c/) is what captures these frames continuously at the cell. These support internal release decisions and external audits when paired with established acceptance methods and [thermography-based NDT inspection](https://www.therness.com/thermography-ndt-testing/) of the finished joint.

## Mapping Thermographic Data to WPS/PQR and Welder Qualifications

Associate frames and metrics with essential variables (current, voltage, travel speed, preheat/interpass) and with PQR/WPQR identifiers and welder qualifications. Record materials and consumables batch IDs. Capture part genealogy, station ID, and revision so investigations can follow a single joint through manufacture and inspection. A [weld monitoring system](https://www.therness.com/welding-monitoring-system/) that timestamps every joint makes this association automatic rather than manual.

Use structured identifiers (e.g., GS1‑like) for joints and segments and embed them in file names and JSON records so exported data remains linkable outside your system.

## Record Retention, Time Stamps, and Tamper‑Evidence

Synchronize clocks (PTP/NTP) and store timestamps in ISO 8601 (UTC). Generate SHA‑256 hashes per record and store them with a signature or in a WORM/append‑only store to provide tamper evidence. Maintain retention per contract and standard; keep hash manifests and audit trails separate from the primary datastore.

Data flow and traceability chain from thermal sensor to audit-ready records

For change control, use versioned procedures and log who/when thresholds and acceptance logic changed. Provide auditors with a read‑only export that includes data, metadata, and signatures.

## Audit Workflows: From Thermal Frames to Acceptance Status

flowchart LR Sensor\["thermal sensor"\] --\> Store\["signed record store"\] Store --\> Rules\["acceptance rules"\] Rules --\> Status\["accept / review / reject"\] Store --\> Export\["export to audit"\]

 See the [sensor-level system overview](https://www.therness.com/videos/three-sensors-same-weld-bead/) for what each sensor records on the same bead.

## Integrating With MES/ERP and QMS (API Hooks and Exports)

Provide REST/CSV exports for part genealogy, NCR workflows, and KPIs. Use webhooks to push acceptance status and alarms to downstream systems and mobile apps. Align data fields with your ITPs and weld maps so evidence is immediately consumable by QA and production teams. Therness [AI QMS agents](https://www.therness.com/services/quality-ai-agents-qms/) automate this evidence filing against ISO 3834 and EN 1090.

Explore our [products](https://www.therness.com/products/) or [contact](https://www.therness.com/contact/) us for implementation details.

## Cybersecurity and Data Governance for Weld Records

Harden devices, segment networks, and enforce least privilege. Inventory all endpoints (cameras, edge computers) and maintain patch levels. Apply role‑based access, MFA for admins, and encrypt data at rest and in transit. Monitor access, retention policy conformance, and integrity checks to support audits and incident response.

**Related:** [thermography fundamentals](https://www.therness.com/blog/infrared-thermography-welding-real-time-quality/)

## Related Articles

- [PPAP for Welded Components: Control Plan & FMEA Samples](https://www.therness.com/blog/ppap-for-welded-components-control-plan-fmea-samples/) — Complete PPAP documentation guide for weld quality
- [ISO 3834 & EN 1090 Audit Checklist for Welding Manufacturers](https://www.therness.com/blog/iso-3834-en-1090-audit-checklist-welding-manufacturers/) — Pre-audit checklist and preparation guide
- [Digital Welding Quality Records: WPS, PQR & Traceability](https://www.therness.com/blog/digital-welding-quality-records-wps-pqr-traceability/) — Digital documentation and QMS integration
- [QMS Software for ISO 3834, EN 1090 & ASME](https://www.therness.com/blog/welding-qms-software-iso-3834-en-1090-asme/) — Software solutions for standards compliance

## References

- ISO 3834 — Quality requirements for fusion welding of metallic materials
- EN 1090 — Execution of steel structures and aluminium structures (FPC)
- ISO 17635 — NDT of welds — General rules
- EN 17637 — Visual testing of fusion‑welded joints

Consult official standards for definitive wording and classes; this article provides implementation guidance, not a substitute for code requirements.

For consumables-specific traceability requirements under ISO 3834 — including batch-to-weld linkage, oven conditioning records, and FIFO management — see our dedicated guide on [welding consumables traceability and digital ISO 3834 compliance](https://www.therness.com/blog/welding-consumables-traceability-iso-3834-digital/).

For pressure vessel fabricators operating under PED 2014/68/EU and ISO 3834-2, see our dedicated guide on [pressure vessel welding quality monitoring: ISO 3834, PED compliance, and real-time thermal inspection](https://www.therness.com/blog/pressure-vessel-welding-quality-monitoring-iso-3834-ped/).

**Therness solution:** [Welding monitoring system](https://www.therness.com/welding-monitoring-system/) — Each weld compared with a reference in the cycle, with anomaly flags and the ISO 3834 / ISO 17635 evidence kept per weld.

Written by **Luca Santoro**  , [founder](https://www.therness.com/author/luca-santoro/)

## Frequently Asked Questions

### What is the difference between ISO 3834 and EN 1090?

ISO 3834 is the welding quality management framework defining what a manufacturer must do to control fusion-welding processes, with three levels: ISO 3834-2 (comprehensive), 3834-3 (standard), 3834-4 (elementary). EN 1090 is the European product standard for execution of steel and aluminium structures, mandating factory production control (FPC) including welding coordination and inspection. EN 1090-2 explicitly references ISO 3834 — most CE/UKCA-marked structural steel work requires ISO 3834-2 compliance.

### What records does ISO 3834 traceability require?

Each weld must be traceable to: the approved Welding Procedure Specification (WPS), the qualifying procedure record (PQR/WPQR), welder/operator qualification certificate (per ISO 9606-1 or 14732), consumables batch and lot data, parent material certificates (EN 10204 type 3.1 minimum), inspection records with quantitative measurements, and acceptance decisions. Digital QMS platforms link these by joint ID.

### How does thermography support ISO 3834 compliance?

Thermal monitoring captures objective process evidence — heat input, T8/5 cooling rate, HAZ width, peak temperature — time-stamped per joint ID. This complements rather than replaces post-weld inspection, but it adds defensible evidence during audits when challenged on welder consistency, parameter drift, or batch reproducibility.

### How long must ISO 3834 records be retained?

Retention depends on the product standard and contract. EN 1090 typically requires 5 years minimum from the declaration of performance. Pressure equipment under PED 2014/68/EU often demands the lifetime of the equipment. Aerospace and rail welding (EN 15085) frequently extend to 30 years. Define retention in your QMS and store records in tamper-evident format.

[book a demo](https://www.therness.com/contact/)

### Share this article

[LinkedIn](https://www.linkedin.com/sharing/share-offsite/?url=https%3A%2F%2Fwww.therness.com%2Fblog%2Fiso-3834-en-1090-welding-traceability-thermography%2F) [X / Twitter](https://twitter.com/intent/tweet?url=https%3A%2F%2Fwww.therness.com%2Fblog%2Fiso-3834-en-1090-welding-traceability-thermography%2F&text=ISO%203834%20%26%20EN%201090%20Welding%20Traceability%20%E2%80%94%20Digital%20Compliance) Email

## Related articles

![Fatigue Cracking at the Weld Toe: Why It Starts There and How to Catch It Early](https://www.therness.com/assets/images/blog/2026-11-14-weld-fatigue-cracking-hero.webp)

### Fatigue Cracking at the Weld Toe: Why It Starts There and How to Catch It Early

Fatigue cracks rarely start in the middle of a bead: they start at the weld toe, where geometry, residual stress and a hard heat-affected zone meet. What drives it, what thermal monitoring can see, and where inspection still decides.

[Fatigue Cracking at the Weld Toe: Why It Starts There and How to Catch It Early](https://www.therness.com/blog/weld-fatigue-cracking/)

![Measuring the Thermal Gradient Across a Weld With a Thermal Camera (°C/mm)](https://www.therness.com/assets/images/blog/2026-11-13-thermal-gradient-weld-hero.webp)

### Measuring the Thermal Gradient Across a Weld With a Thermal Camera (°C/mm)

Turn a thermal image into a gradient in °C/mm: pixel size on the part, emissivity, blur near the arc and what a steep or shallow gradient tells you about distortion and cooling.

[Measuring the Thermal Gradient Across a Weld With a Thermal Camera (°C/mm)](https://www.therness.com/blog/measure-thermal-gradient-across-weld-thermal-camera-c-per-mm/)

![What an Arc's Electrical Signal Shows in 30 ms (R&D, in Development)](https://www.therness.com/assets/images/blog/s14-arc-signal-rd.webp)

### What an Arc's Electrical Signal Shows in 30 ms (R&D, in Development)

Therness R&D on 189 real beads: a small detector reads the electrical signal of the arc and flags the bead that does not belong. Not a product feature yet.

[What an Arc's Electrical Signal Shows in 30 ms (R&D, in Development)](https://www.therness.com/blog/what-arc-electrical-signal-shows-30ms-rd/)
