Discover HeatCore AI

ISO 6520-1 group 5 · Imperfect shape and dimension

Incorrect weld toe (ISO 6520-1 ref. 505): causes and detection

ISO 6520-1 reference 505 covers incorrect weld toe: 5051 (angle) and 5052 (radius), an abrupt bead-to-plate transition rather than a smooth blend. Cause matrix, why the pool camera catches poor wetting live, and where acceptance is set.

ISO 6520-1 reference
505
Group
5 — Imperfect shape and dimension
Also called
Incorrect weld toe, Poor toe blend

Incorrect weld toe is a shape imperfection with no missing or extra metal: the bead and fusion are sound, and the only fault is how the face meets the parent surface. ISO 6520-1 splits it into 5051 (angle) and 5052 (radius) — a toe can fail either independently. That sets it apart from its toe-line neighbours — undercut removes parent metal, overlap folds filler over unfused metal — while incorrect weld toe changes nothing but the blend itself.

It earns its own reference number because of fatigue. A weld toe is already a geometric discontinuity, and assessment methods work from its radius as much as its angle — a tighter radius raises the stress concentration the same way a steeper angle does. Two welds can be equally sound and free of undercut and still have very different fatigue lives, because one wets out smoothly and the other does not.

Because wetting is a live, visible event, a pool camera watches the imperfection form in real time rather than only confirming it afterward — one of the few Group 5 imperfections where in-process camera evidence is a primary route, on par with the profile gauge used once the bead has cooled.

Typical causes

What produces incorrect weld toe, the mechanism, and the control that removes it
CauseMechanismControl
Arc energy too low, or travel speed too high, for the process and jointThe pool freezes before it wets out and blends into the parent surface, leaving an abrupt transition instead of a gradual one.Record arc energy per pass against the qualified window rather than trusting a bead that looks fused on the surface.
Shielding gas or process chosen for deposition rate rather than wettingSome gas mixtures and high-deposition processes favour a more convex, less-wetted profile than a spray-transfer pass at the same parameters.Qualify the gas mixture and process for the toe profile the application needs.
Torch angle directing filler toward the joint centre rather than the toeFiller piles centrally instead of flowing out to blend with the parent surface at the edge of the bead, leaving that edge steep.Verify torch angle and weave technique against the qualified procedure, especially on the cover pass.

Detection: which route finds it

The column that matters most is the last one. An inspection family marked as not finding this imperfection will not find it however carefully it is applied, and planning around that is cheaper than discovering it during a final examination.

Detection routes for incorrect weld toe, and what each one can and cannot see
FamilyMethodCapabilityWhat it sees
VisualVisual testing to ISO 17637, with a weld profile, toe-angle or toe-radius gaugePrimary routeThe toe transition is external geometry: a gauge reads angle (5051) against the plate surface, or blend radius (5052) at the same location.
ThermalIn-process infrared thermographySupporting signalPoor wetting correlates with the pool cooling faster at its edges, visible before the bead solidifies.
CameraHigh-speed weld pool imagingPrimary routeWetting is directly visible while it happens — a pool piling centrally rather than flowing to the edges is the imperfection forming, not a precursor to it.
NDTVolumetric NDT (radiographic or ultrasonic testing)Does not find itAn incorrect toe is surface geometry, not a subsurface indication; volumetric NDT says nothing about how the face blends into the plate.

Where acceptance is defined

Therness pages never reproduce a standard's acceptance values: those tables are copyrighted and belong in the copy you hold. What follows is the pointer — which document governs, and which part of it to open.

Documents that set the acceptance criteria, and the clause topic to read
StandardClause topicNote
ISO 5817Quality levels for weld toe transition, distinct from the undercut and overlap rows at the same locationRead the standard's own row rather than assuming an undercut or overlap check also covers toe.
AWS D1.1Profile acceptance for cyclically loaded connectionsToe geometry is treated more strictly wherever fatigue, not static strength, governs.

Questions about incorrect weld toe

Is incorrect weld toe the same as undercut?

No, though they share a location. Undercut removes parent metal at the toe; incorrect weld toe is the bead's own angle (5051) or radius (5052) being too abrupt, with no parent metal removed.

Why do toe angle and radius matter more on a fatigue-loaded joint?

A steep angle or tight radius both concentrate stress where a cyclic load repeatedly passes, which is why fatigue-governed codes profile the toe while static codes are usually satisfied by sound weld metal alone.

Can toe-grinding fix an incorrect weld toe after the fact?

Yes — it reshapes the transition to blend more gradually, independent of any repair to the weld metal.

See the condition, not the consequence

Most weld imperfections are produced by conditions that exist while the arc is running. Therness records those conditions on every weld, so a suspect run is known on the shift that made it rather than in a batch report.

Progetto cofinanziato nell'ambito del PR Piemonte FSE+ 2021-2027,
Priorità I, Obiettivo Specifico a), Azione 4 – "Sostegno alla nascita delle start up"