# Incorrect weld toe (ISO 6520-1 ref. 505): causes and detection

Source: https://www.therness.com/defects/505-incorrect-weld-toe/
Language: en

ISO 6520-1 group 5 · Imperfect shape and dimension

ISO 6520-1 reference 505 covers incorrect weld toe: 5051 (angle) and 5052 (radius), an abrupt bead-to-plate transition rather than a smooth blend. Cause matrix, why the pool camera catches poor wetting live, and where acceptance is set.

ISO 6520-1 reference

505

Group

5 — Imperfect shape and dimension

Also called

Incorrect weld toe, Poor toe blend

Incorrect weld toe is a shape imperfection with no missing or extra metal: the bead and fusion are sound, and the only fault is how the face meets the parent surface. ISO 6520-1 splits it into 5051 (angle) and 5052 (radius) — a toe can fail either independently. That sets it apart from its toe-line neighbours — [undercut](https://www.therness.com/defects/5011-undercut/) removes parent metal, [overlap](https://www.therness.com/defects/506-overlap/) folds filler over unfused metal — while incorrect weld toe changes nothing but the blend itself.

It earns its own reference number because of fatigue. A [weld toe](https://www.therness.com/glossary/weld-toe/) is already a geometric discontinuity, and assessment methods work from its radius as much as its angle — a tighter radius raises the stress concentration the same way a steeper angle does. Two welds can be equally sound and free of undercut and still have very different fatigue lives, because one wets out smoothly and the other does not.

Because wetting is a live, visible event, a pool camera watches the imperfection form in real time rather than only confirming it afterward — one of the few Group 5 imperfections where in-process camera evidence is a primary route, on par with the profile gauge used once the bead has cooled.

## Typical causes

What produces incorrect weld toe, the mechanism, and the control that removes it

| Cause | Mechanism | Control |
| --- | --- | --- |
| Arc energy too low, or travel speed too high, for the process and joint | The pool freezes before it wets out and blends into the parent surface, leaving an abrupt transition instead of a gradual one. | Record arc energy per pass against the qualified window rather than trusting a bead that looks fused on the surface. |
| Shielding gas or process chosen for deposition rate rather than wetting | Some gas mixtures and high-deposition processes favour a more convex, less-wetted profile than a spray-transfer pass at the same parameters. | Qualify the gas mixture and process for the toe profile the application needs. |
| Torch angle directing filler toward the joint centre rather than the toe | Filler piles centrally instead of flowing out to blend with the parent surface at the edge of the bead, leaving that edge steep. | Verify torch angle and weave technique against the qualified procedure, especially on the cover pass. |

## Detection: which route finds it

The column that matters most is the last one. An inspection family marked as not finding this imperfection will not find it however carefully it is applied, and planning around that is cheaper than discovering it during a final examination.

Detection routes for incorrect weld toe, and what each one can and cannot see

| Family | Method | Capability | What it sees |
| --- | --- | --- | --- |
| Visual | Visual testing to ISO 17637, with a weld profile, toe-angle or toe-radius gauge | Primary route | The toe transition is external geometry: a gauge reads angle (5051) against the plate surface, or blend radius (5052) at the same location. |
| Thermal | In-process infrared thermography | Supporting signal | Poor wetting correlates with the pool cooling faster at its edges, visible before the bead solidifies. |
| Camera | High-speed weld pool imaging | Primary route | Wetting is directly visible while it happens — a pool piling centrally rather than flowing to the edges is the imperfection forming, not a precursor to it. |
| NDT | Volumetric NDT (radiographic or ultrasonic testing) | Does not find it | An incorrect toe is surface geometry, not a subsurface indication; volumetric NDT says nothing about how the face blends into the plate. |

## Where acceptance is defined

Therness pages never reproduce a standard's acceptance values: those tables are copyrighted and belong in the copy you hold. What follows is the pointer — which document governs, and which part of it to open.

Documents that set the acceptance criteria, and the clause topic to read

| Standard | Clause topic | Note |
| --- | --- | --- |
| ISO 5817 | Quality levels for weld toe transition, distinct from the undercut and overlap rows at the same location | Read the standard's own row rather than assuming an undercut or overlap check also covers toe. |
| AWS D1.1 | Profile acceptance for cyclically loaded connections | Toe geometry is treated more strictly wherever fatigue, not static strength, governs. |

## Standards that govern this imperfection

- [ISO 5817](https://www.therness.com/standards/iso-5817/)Does ISO 5817 govern your joint? Scope decision flow for the steel, nickel and titanium quality-level standard, the codes it is read with, and the records that evidence conformity.

## Imperfections found alongside it

- [Undercut (ref. 5011)](https://www.therness.com/defects/5011-undercut/)Imperfect shape and dimension — ISO 6520-1 group 5.
- [Overlap (ref. 506)](https://www.therness.com/defects/506-overlap/)Imperfect shape and dimension — ISO 6520-1 group 5.
- [Excessive convexity (ref. 503)](https://www.therness.com/defects/503-excessive-convexity/)Imperfect shape and dimension — ISO 6520-1 group 5.

## Terms used on this page

[Weld toe](https://www.therness.com/glossary/weld-toe/)

The weld toe is the boundary line where the surface of a weld bead meets the surface of the parent material, on either side of the weld.

[Weld pool](https://www.therness.com/glossary/weld-pool/)

The weld pool is the localized volume of molten metal created by the welding heat source, into which filler metal is added and from which the weld bead forms as it solidifies.

## Where this imperfection dominates

Offshore oil, gas and marine energy structures

### [Weld monitoring for offshore structures and pipelines](https://www.therness.com/applications/offshore/)

Fixed platforms, topside piping and subsea pipelines welded under classification-society rules and the transportation codes. The pain points that cost offshore fabricators most, and which Therness signal addresses each.

Shipbuilding and marine fabrication

### [Weld monitoring for shipbuilding](https://www.therness.com/applications/shipbuilding/)

High-volume welding under classification-society rules. The codes that apply, the four monitoring pain points that cost yards most, and which Therness signal addresses each.

## Questions about incorrect weld toe

### Is incorrect weld toe the same as undercut?

No, though they share a location. Undercut removes parent metal at the toe; incorrect weld toe is the bead's own angle (5051) or radius (5052) being too abrupt, with no parent metal removed.

### Why do toe angle and radius matter more on a fatigue-loaded joint?

A steep angle or tight radius both concentrate stress where a cyclic load repeatedly passes, which is why fatigue-governed codes profile the toe while static codes are usually satisfied by sound weld metal alone.

### Can toe-grinding fix an incorrect weld toe after the fact?

Yes — it reshapes the transition to blend more gradually, independent of any repair to the weld metal.

## See the condition, not the consequence

Most weld imperfections are produced by conditions that exist while the arc is running. Therness records those conditions on every weld, so a suspect run is known on the shift that made it rather than in a batch report.

[Book a technical call](https://www.therness.com/contact/) [See the thermal weld camera](https://www.therness.com/products/heatcam-ir-c/)
