# Essential variable

Source: https://www.therness.com/glossary/essential-variable/
Language: en

Welding glossary

An essential variable is a welding condition that a procedure qualification depends on: change it beyond the range the qualification supports and the procedure must be requalified, or covered by another qualification record, before welding continues.

[WPS essential variables checklist builder](https://www.therness.com/tools/wps-variables-checklist/)

Full guide

[Essential variable: the long-form guide](https://www.therness.com/blog/asme-section-ix-welding-procedure-qualification-digital-monitoring/)

This page defines the term. The guide works through how it is calculated, controlled and evidenced.

An essential variable is a welding condition that the qualification of a procedure depends on. A test weld proves a procedure for the combination of conditions it used, and an essential variable marks a direction in which that proof stops. Move one outside the range the record supports and the [WPS](https://www.therness.com/glossary/wps/) built from the [PQR](https://www.therness.com/glossary/pqr/) no longer covers the job, however the finished weld looks. A new qualification test, or another qualification record that covers the new condition, comes before production welding continues. This entry is about procedure qualification; a welder’s qualification has its own variables, set out in standards such as [ISO 9606-1](https://www.therness.com/standards/iso-9606-1/).

ASME Section IX sorts procedure variables into three categories. Essential variables, changed beyond the qualified range, call for a new or another supporting qualification record. Supplementary essential variables apply only when the construction code requires impact testing, and an increase in heat input above the qualified value is the usual example. Nonessential variables can be changed by revising the WPS, with no new test. On the ISO route, the procedure test states the limits as a range of qualification ([ISO 15614-1](https://www.therness.com/standards/iso-15614-1/) for arc and gas welding of steels and arc welding of nickel and nickel alloys, other parts of the series for other materials and processes), and the two routes are not interchangeable. The full assignment, process by process and edition by edition, is for the code’s variable tables; the cases below are examples to confirm there.

## Worked example: two changes in one week

A shop holds a Section IX qualification record for a GMAW procedure. Two changes arrive in the same week.

1. The job moves to a base metal with a P-Number the qualification record does not qualify.
2. The shielding gas flow is raised above the flow-rate range the WPS states.

The first is the classic essential variable. A base metal the record does not qualify is outside the record, so a new test or a supporting record comes before the first production weld. On the ISO route the same move is checked against the parent material group in the range of qualification. The second is a nonessential variable in the Section IX tables for GTAW and GMAW/FCAW, as the [Section IX guide](https://www.therness.com/blog/asme-section-ix-welding-procedure-qualification-digital-monitoring/) sets out, so the WPS is revised and welding carries on with no new test. Confirm both in the edition your code invokes.

Same shop, same week, opposite outcomes, and neither can be judged from the look of the bead. What separates an essential variable from its nearest neighbour, the nonessential variable, is whether the code treats the change as able to affect the properties the qualification proved, and the code’s tables answer that for each process. A travel speed limit on a WPS is one place the question comes up; see [travel speed range (WPS)](https://www.therness.com/glossary/param-travel-speed-range-wps/).

## Where you meet this term

- Procedure qualification planning, where the test-weld conditions are chosen so the record covers the range production will use
- Change control on the shop floor, where a proposed substitution is checked against the code's variable tables before it is approved
- Requalification decisions, where a change outside the qualified range leads to a new test or a supporting record
- Audits, where the production record is checked against the range the qualification supports

## Related terms

[Welding procedure specification](https://www.therness.com/glossary/wps/)

A welding procedure specification (WPS) is the documented set of welding variables — process, materials, parameters and technique — that a welder or welding operator must follow to reproduce a qualified weld.

[Procedure qualification record](https://www.therness.com/glossary/pqr/)

A procedure qualification record (PQR) is the documented evidence, including the actual test results, that a welding procedure performed under recorded conditions produces a weld meeting the required mechanical and soundness properties.

[Welding procedure qualification](https://www.therness.com/glossary/welding-procedure-qualification/)

Welding procedure qualification is the tested activity that establishes a welding procedure can produce a weld meeting the required mechanical and soundness properties, running from a preliminary specification through a qualification test to the qualified WPS a production welder follows.

[Heat input](https://www.therness.com/glossary/heat-input/)

Heat input is the energy delivered to a joint per unit length of weld, calculated from arc voltage, welding current and travel speed and multiplied by the thermal efficiency factor of the process.

## Standards that use this term

- [ASME BPVC Section IX](https://www.therness.com/standards/asme-ix/)ASME Section IX (BPVC Section 9) qualifies welding procedures (WPS, PQR) and welders (WPQ). When it applies, the codes that invoke it, and the records that prove it.
- [ISO 15614-1](https://www.therness.com/standards/iso-15614-1/)Does ISO 15614-1 qualify your procedure? Scope decision flow for the arc-welding procedure test, the codes it sits inside, and the records that evidence the qualified range.
- [ISO 15607](https://www.therness.com/standards/iso-15607/)Does ISO 15607 govern how your welding procedure gets qualified? Scope decision flow for the general-rules standard, the five routes it indexes, and the pWPS-to-WPQR trail that follows from picking one.
- [ISO 9606-1](https://www.therness.com/standards/iso-9606-1/)Does ISO 9606-1 cover your welder for this job? Scope decision flow for the steel welder-qualification standard, the codes it sits beside, and the records a range-of-approval check depends on.

[All glossary terms](https://www.therness.com/glossary/)
