# Responsible welding coordinator (RWC)

Source: https://www.therness.com/glossary/responsible-welding-coordinator-rwc/
Language: en

Welding glossary

A responsible welding coordinator (RWC) — the designation EN 1090-2 names — is the person a manufacturer formally appoints to hold the welding-quality coordination tasks ISO 14731 assigns for a defined scope of work, at a technical-knowledge level matched to that scope's complexity and consequence.

Full guide

[Responsible welding coordinator: the long-form guide](https://www.therness.com/blog/responsible-welding-coordinator-iso-14731-role-and-audit-evidence/)

This page defines the term. The guide works through how it is calculated, controlled and evidenced.

A responsible welding coordinator is a job function ISO 14731 defines and EN 1090-2 names, not a job title a diploma confers on its own. The standard sets out the welding-quality tasks a manufacturer has to allocate — contract review, procedure control, personnel competence, production supervision, inspection, equipment control and disposition of deviations — and requires a named person, or a named person per task, to hold them for a defined scope of work.

The scope decides the depth of knowledge the appointment needs, and ISO 14731 grades that depth into three named levels: **comprehensive** technical knowledge, **specific** technical knowledge, and **basic** technical knowledge. A straightforward fabrication in a familiar material and process can be coordinated at the basic level; a complex, safety-critical or unfamiliar scope needs comprehensive knowledge, and a coordinator qualified only to the specific or basic level cannot be the named owner of a scope that calls for comprehensive knowledge, whatever their formal diploma says. This is a decision the manufacturer has to make and justify for its own products, materials, processes and consequence of failure — not a lookup performed once and assumed to travel to every future job.

Where the name actually surfaces is easy to get wrong. ISO 14731 does not require the RWC’s name on every [WPS](https://www.therness.com/glossary/wps/) sheet, though many manufacturers’ own templates add a sign-off block there for traceability. What has to exist, and what an auditor asks for, is a document trail: the appointment record itself, the [ISO 3834](https://www.therness.com/standards/iso-3834-2/) audit evidence connecting that appointment to the certified scope, and — once a structure sits under EN 1090-2 at execution class EXC2 or above — the factory production control record naming who holds the role. A coordinator can be real and competent with no name on a single production drawing, as long as that trail exists and points to them.

## Where you meet this term

- Appointment letters and organisation charts, naming the person, the scope and the reporting line
- ISO 3834 certification audits, as the evidence a manufacturer's welding-quality system has a named owner
- EN 1090-2 factory production control records, where a coordinator is mandatory from EXC2 upward
- Welding procedure specification approval and deviation sign-off, where the coordinator's authority is exercised, not just declared

## Related terms

[Welding procedure specification](https://www.therness.com/glossary/wps/)

A welding procedure specification (WPS) is the documented set of welding variables — process, materials, parameters and technique — that a welder or welding operator must follow to reproduce a qualified weld.

[Welder qualification](https://www.therness.com/glossary/welder-qualification/)

Welder qualification is the documented demonstration that a specific welder or welding operator can produce a sound weld within a defined range of processes, materials, thicknesses and positions.

[Procedure qualification record](https://www.therness.com/glossary/pqr/)

A procedure qualification record (PQR) is the documented evidence, including the actual test results, that a welding procedure performed under recorded conditions produces a weld meeting the required mechanical and soundness properties.

## Standards that use this term

- [ISO 14731](https://www.therness.com/standards/iso-14731/)Does your organisation need a named welding coordinator? Scope decision flow for ISO 14731, the personnel standards it sits beside, and the records an appointment has to produce.
- [ISO 3834-2](https://www.therness.com/standards/iso-3834-2/)ISO 3834-2 sets comprehensive quality requirements for fusion welding. Decision flow for choosing between parts 2, 3 and 4, the codes that invoke it, and the records that satisfy its equipment and traceability clauses.

[All glossary terms](https://www.therness.com/glossary/)
