# Weld pool temperature

Source: https://www.therness.com/glossary/weld-pool-temperature/
Language: en

Welding glossary

Weld pool temperature is the temperature of the molten metal in the weld pool at a given point, which is not uniform: it spans from superheated liquid nearest the arc or beam to the solidification front at the trailing edge, where the metal sits between its liquidus and solidus.

Unit

°C (a local value, not a single pool temperature)

A weld pool does not have a temperature the way a room does. It has a temperature *field*: hottest where the arc or beam delivers energy directly, and progressively cooler moving outward, because heat is flowing away from that point into the surrounding solid metal and into the pool’s own advancing edges the whole time the pool exists.

The two ends of that field answer to different physics. Near the centre, where the heat source acts, the metal sits above its liquidus temperature — superheated liquid, not merely molten. At the trailing edge, behind the heat source’s direction of travel, the temperature has fallen back toward the [weld pool](https://www.therness.com/glossary/weld-pool/)’s freezing range: metal there sits between liquidus and solidus, part liquid and part already solidifying, which is exactly where the finished bead’s microstructure starts to be set. A single instrument reading taken without saying which of these two regions it looked at, or somewhere between them, is not comparable to another reading taken at a different point in the same pool, however precise either measurement is on its own.

That is also why “weld pool temperature” as a project specification is rarely written as one number the way [interpass temperature](https://www.therness.com/glossary/interpass-temperature/) is: an interpass value is a point reading, taken at a defined location on the weld metal and adjacent parent material once the pool has solidified, immediately before the next run starts. A weld pool has no such moment to be read at — there is no instant in its existence when it is not a field spanning superheated liquid to a solidifying edge, so no single point on it stands in for the whole the way an interpass reading is allowed to.

The practical consequence is a reporting rule rather than a formula: any weld pool temperature reading is only meaningful stated alongside the position in the pool it was taken from and the surface [emissivity](https://www.therness.com/glossary/emissivity/) assumed to convert measured radiance into that temperature — liquid metal under an arc is one of the harder surfaces to fix an emissivity value for, because it is bright, moving and partly obscured by arc glare rather than a settled, oxidised solid. A reading missing either of those two facts is a number without the context needed to judge whether it means anything at all, let alone whether it can be compared against a different pass, a different machine, or a different day.

## Where you meet this term

- Real-time thermal camera monitoring of the arc and weld pool during welding
- Weld pool stability assessment when a candidate parameter set is being developed
- Wire arc additive manufacturing, where pool and interlayer temperature both need control as a build grows
- Post-weld metallurgical review, correlating recorded thermal behaviour with the solidification structure found on sectioning

## Related terms

[Weld pool](https://www.therness.com/glossary/weld-pool/)

The weld pool is the localized volume of molten metal created by the welding heat source, into which filler metal is added and from which the weld bead forms as it solidifies.

[Thermal gradient](https://www.therness.com/glossary/thermal-gradient/)

A thermal gradient is the rate of change of temperature with distance across or along a workpiece, and it is the quantity that drives heat flow, thermal stress and distortion during and after welding.

[Emissivity](https://www.therness.com/glossary/emissivity/)

Emissivity is the ratio between the thermal radiation emitted by a real surface and that emitted by an ideal blackbody at the same temperature, expressed as a dimensionless value between zero and one.

## Applications where it is controlled

Additive manufacturing and near-net-shape production

### [Monitoring for wire arc additive manufacturing](https://www.therness.com/applications/wire-arc-additive-manufacturing/)

WAAM is welding with no interpass inspection access and no wrought equivalent to compare against. The codes that apply, the four monitoring pain points, and which Therness signal addresses each.

[All glossary terms](https://www.therness.com/glossary/)
