# What Welding Burn-Through Looks Like Under a High-Speed Camera

Source: https://www.therness.com/videos/welding-burn-through-high-speed-camera/
Language: en

A close-up of one of the most common welding defects: burn-through on a tee joint. The high-speed footage shows the exact moment the weld pool collapses under excessive heat input.

![What Welding Burn-Through Looks Like Under a High-Speed Camera (Tee Joint)](https://i.ytimg.com/vi/cgDHtE6hg7s/hqdefault.jpg)

Burn-through (melt-through) happens when heat input exceeds what the joint can sustain: the pool loses support, root penetration fails, and the bead collapses. On a production line this means rework, scrap, or a structural defect that escapes to the customer. Captured frame by frame, the failure mechanism becomes obvious — and so does the case for real-time monitoring that flags pool collapse the moment it starts instead of at final inspection.

## Key Takeaways

- The exact moment of weld pool collapse on a tee joint, frame by frame.
- Burn-through is a heat-input/parameter failure — visible before it is audible.
- Root penetration failure mechanics shown at the timescale they happen.
- Real-time monitoring can flag the precursor instead of the post-mortem.

## Deploy with Therness

- HeatCam thermal cameras capture the heat field; HeatCore scores it in real time.
- HeatCore AI scores defect precursors like overheating while the weld runs.
- Alerts integrate with PLC/robot controllers to stop defects mid-weld.
- Per-weld evidence supports NCR root-cause analysis and ISO 17637 records.

## What the frames reveal

Slowed to individual frames, burn-through stops being a single event and becomes a sequence. First the pool at the root grows past the point where surface tension can hold it against gravity; the underside bulges, a window opens, and molten metal drops through, leaving a hole where sound root fusion should be. On a thin-gauge tee joint that tipping point arrives fast, which is why frame rate matters — at ordinary video speed the collapse is one blurred instant with no usable cause. What the footage exposes is that burn-through is a [heat-input problem](https://www.therness.com/blog/burn-through-welding-causes-prevention-monitoring/) that announces itself well before the hole: the pool over-widens and sags for several frames first. That precursor is a measurable signal, which is the whole argument for watching penetration as it forms rather than discovering a blown-out root at final inspection.

## Related videos

- [Inside a molten pool at 480 fps](https://www.therness.com/videos/inside-welding-molten-pool-480fps/)
- [High-speed pool & droplet transfer](https://www.therness.com/videos/high-speed-weld-pool-droplet-transfer/)
- [CMT pool solidification, frame by frame](https://www.therness.com/videos/cmt-weld-pool-solidification-480fps/)

## Related products & guides

- [PoolDrop — 480 fps weld pool camera](https://www.therness.com/products/therness-pooldrop/)
- [Welding camera overview](https://www.therness.com/welding-camera/)

[Discover HeatCore AI](https://www.therness.com/products/therness-heatcore-ai/) [Back to video library](https://www.therness.com/videos/) [Read: Penetration Depth Control](https://www.therness.com/blog/weld-penetration-depth-control-thermal-monitoring/)
