When a welded part could be read as steel structure or as industrial piping: the questions that decide EN 1090-2 or EN 13480, and the welding records each one asks for.
Which welded-tank standard governs your tank: the vapour-space pressure, design metal temperature and service questions that decide it, and the records to keep.
Scoperta imprenditoriale II and the 2026 iperammortamento: what each Italian incentive covers for a weld monitoring system and what to bring to your advisor.
A practical decision guide for choosing the qualification route named by your construction code, checking welder scope, and keeping production evidence audit-ready.
How to select a K, T or Y tubular joint under AWS D1.1, check a qualified parameter window and record the process evidence that supports production decisions.
Fixed thermal camera or periodic thermography survey for a plant asset: how failure speed, load, access and consequence decide, and when to combine both.
Which NCR, CAPA and PPAP steps an AI agent can prepare in a welding QMS, and which decisions stay with the signature of a responsible person.
Choosing a weld overlay process for corrosion-resistant cladding: how GMAW, hot-wire GTAW, strip and laser cladding differ, and what to monitor on each.
When a drone infrared flight is enough on a PV plant, and when ground thermography, electroluminescence or I-V curve tracing is needed, and in which order.
Without a robot or PLC: which welder, WPS, electrical, thermal and timing data a manual station can record for each joint, and what it cannot capture.
Process emission sensors, coaxial camera, thermal camera or keyhole depth measurement: what each method sees in laser welding and when to combine them.
Power sources of different makes and ages, some with no data port: read the machine interface, measure at the cable or use PLC tags? What each route loses.
Progetto cofinanziato nell'ambito del PR Piemonte FSE+ 2021-2027,
Priorità I, Obiettivo Specifico a), Azione 4 – "Sostegno alla nascita delle start up"
